FAG bearing deep groove ball bearings

Deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highly suitable for applications where high speeds and low power loss are required.

• Excellent for high speeds

• Good radial load capacity

• Acceptable axial load capacity in both directions

• Have low torque capacity at startup and running speeds

• Can operate with low noise

• Require little maintenance

 

Bearing NO.	Principal(mm)			Basic Load ratings(KN)		Parameters of ball		Speed ratings(r/min)		Mass(KG)
	d	D	B	Dynamic	Static	Number	Size	Grease	Static
6000	10	26	8	4.55	1.95	7	4.763	29000	34000	0.019
6001	12	28	8	5.10	2.39	8	4.763	26000	30000	0.022
6002	15	32	9	5.60	2.84	9	4.763	22000	26000	0.030
6003	17	35	10	6.80	3.35	10	4.763	20000	24000	0.039
6004	20	42	12	9.40	5.05	9	6.350	18000	21000	0.069
6005	25	47	12	10.10	5.85	10	6.350	15000	18000	0.080
6006	30	55	13	13.20	8.30	11	7.144	13000	15000	0.120
6007	35	62	14	16.00	10.30	11	7.938	12000	14000	0.160
6008	40	68	15	16.80	11.50	12	7.938	10000	12000	0.190
6009	45	75	16	21.00	15.10	12	8.731	9200	11000	0.250
6010	50	80	16	21.80	16.60	13	8.731	8400	98000	0.260
6011	55	90	18	28.30	21.20	12	11.000	7700	9000	0.390
6012	60	95	18	29.50	23.20	13	11.000	7000	8300	0.420
6013	65	100	18	30.50	25.20	13	11.112	6500	7700	0.440
6014	70	110	20	38.50	31.00	13	12.303	6100	7100	0.600
6015	75	115	20	39.50	33.50	14	12.303	5700	6700	0.640
6016	80	125	22	47.50	40.00	14	13.494	5300	6200	0.850
6017	85	130	22	49.50	43.00	14	14.000	5000	5900	0.890
6018	90	140	24	58.00	49.50	14	15.081	4700	5600	1.150
6019	95	145	24	60.50	54.00	14	15.081	4500	5300	1.200
6020	100	150	24	60.00	54.00	14	16.000	4200	5000	1.250