1.The definition of single row angular contact ball bearing

Single row angular contact ball bearings can accommodate axial loads acting in one direction only . Under radial loads a force acting in the axial direction is produced in the bearing, and this force must be counteracted. Consequently the bearing is normally adjusted against a second bearing.

2. Features of angular contact ball bearings

Angular  contact ball bearings can be subject to both radial and axial load: it also can be subject to pure axial load, its axial load capacity is depend on the contact angle and increased accordingly .It can be used for high speed and high precision application due to high limit speed and pre-adjustable rigidity.

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small.

Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They differ in the size of their contact angle and the design of the bearing rings.

The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance-free and, as a result, allow particularly economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is very small. 

Spindle bearings are single row angular contact ball bearings comprising solid inner and outer rings and ball and cage assemblies with solid window cages. They cannot be dismantled. The bearings are available in open and sealed versions.

Spindle bearings have restricted tolerances. They are particularly suitable for bearing arrangements with very high requirements for guidance accuracy and speed capacity. They have proved highly suitable for the bearing arrangements of spindles in machine tools.

Four point contact ball bearings are single row angular contact ball bearings and therefore require significantly less space in an axial direction than double row designs.

3.The application of angular contact ball bearing

 These bearings are mainly applied in the machine tool spindles, high-frequency motors, gas turbines, oil pumps, air compressors, printing machines and other installations.

4.The type of angular contact ball bearing

Single Row Angular contact ball bearing

Double Row Angular contact ball bearing

Combined angular contact ball bearing  

Four point contact ball bearing

Our main products are as following : 

7000C 7000AC 7200B 
7001C 7001AC 7201B 
7002C 7002AC 7202B 
7003C 7003AC 7203B 
7004C 7004AC 7204B 
7005C 7005AC 7205B 
7006C 7006AC 7206B 
7007C 7007AC 7207B 
7008C 7008AC 7208B 
7009C 7009AC 7209B 
7010C 7010AC 7210B 
7011C 7011AC 7211B 
7012C 7012AC 7212B 
7013C 7013AC 7213B 
7014C 7014AC 7214B 
7015C 7015AC 7215B 
7016C 7016AC 7216B 
7017C 7017AC 7217B 
7018C 7018AC 7218B 
7019C 7019AC 7219B 
7020C 7020AC 7220B 
7021C 7021AC 7221B 
7022C 7022AC 7222B 
7024C 7024AC 7224B 
7026C 7026AC 7226B 
7028C 7028AC 7228B 
7030C 7030AC 7230B 
7032C 7032AC 7232B 

7200AC 7200C 7200B 
7201AC 7201C 7201B 
7202AC 7202C 7202B 
7203AC 7203C 7203B 
7204AC 7204C 7204B 
7205AC 7205C 7205B 
7206AC 7206C 7206B 
7207AC 7207C 7207B 
7208AC 7208C 7208B 
7209AC 7209C 7209B 
7210AC 7210C 7210B 
7211AC 7211C 7211B 
7212AC 7212C 7212B 
7213AC 7213C 7213B 
7214AC 7214C 7214B 
7215AC 7215C 7215B 
7216AC 7216C 7216B 
7217AC 7217C 7217B 
7218AC 7218C 7218B 
7219AC 7219C 7219B 
7220AC 7220C 7220B 
7221AC 7221C 7221B 
7222AC 7222C 7222B 
7224AC 7224C 7224B 
7226AC 7226C 7226B 
7228AC 7228C 7228B 
7230AC 7230C 7230B 
7232AC 7232C 7232B 

7300C 7300B 7300AC 
7301C 7301B 7301AC 
7302C 7302B 7302AC 
7303C 7303B 7303AC 
7304C 7304B 7304AC 
7305C 7305B 7305AC 
7306C 7306B 7306AC 
7307C 7307B 7307AC 
7308C 7308B 7308AC 
7309C 7309B 7309AC 
7310C 7310B 7310AC 
7311C 7311B 7311AC 
7312C 7312B 7312AC 
7313C 7313B 7313AC 
7314C 7314B 7314AC 
7315C 7315B 7315AC 
7316C 7316B 7316AC 
7317C 7317B 7317AC 
7318C 7318B 7318AC 
7319C 7319B 7319AC 
7320C 7320B 7320AC 
7321C 7321B 7321AC 
7322C 7322B 7322AC 
7324C 7324B 7324AC 
7326C 7326B 7326AC 
7328C 7328B 7328AC 
7330C 7330B 7330AC 
7332C 7332B 7332AC 

7901C 7901AC 
7902C 7902AC 
7903C 7903AC 
7904C 7904AC 
7905C 7905AC 
7906C 7906AC 
7907C 7907AC 
7908C 7908AC 
7909C 7909AC 
7910C 7910AC 
7911C 7911AC 
7912C 7912AC 
7913C 7913AC 
7914C 7914AC 
7915C 7915AC 
7916C 7916AC 
7917C 7917AC 
7918C 7918AC 
7919C 7919AC 
7920C 7920AC 
7921C 7921AC 
7922C 7922AC 
7924C 7924AC 
7926C 7926AC 
7928C 7928AC 
7930C 7930AC 

7406C 7406AC 7406B 
7407C 7407AC 7407B 
7408C 7408AC 7408B 
7409C 7409AC 7409B 
7410C 7410AC 7410B 
7411C 7411AC 7411B 
7412C 7412AC 7412B 
7413C 7413AC 7413B 
7414C 7414AC 7414B 
7415C 7415AC 7415B 
7416C 7416AC 7416B 
7417C 7417AC 7417B 
7418C 7418AC 7418B