Single Row Angular Contact Ball Bearing

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. CLUNT can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by CLUNT is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

DOUBLE ROW ANGULAR CONTACT

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. CLUNT's 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

Introduction

Angular contact ball bearing can bear radial load and axial load,and can work in high revolving speed.

Application feilds

Machine tool spindle, high frequency motor, gas turbine, centrifugal separator, small car front wheel, filling machine, differential pinion shaft, booster pump, drilling platform, food machinery, dividing head, low noise type cooling tower, electrical equipment, coating equipment, machine tool trough plate, arc welding machine.